Jensen MP6612i manual Bit Rates, MP3 Playing Order, Loading an MP3/WMA Disc, Loading an SD Card

Page 19

MP6612i

Bit Rates

The unit supports bit rates from 32 - 320 kbps.

MP3 Playing Order

When selected for play, files and folders (Folder Search, File Search or Folder Select) are accessed in the order they were written by the CD writer. As a result, the order in which they are expected to be played may not match the order in which they are actually played. You may be able to set the order in which MP3/WMA files are to be played by writing them onto a medium such as a CD-R with their file names beginning with play sequence numbers such as "01" to "99". For example, a medium with the following folder/file hierarchy is subject to Folder Search, File Search or Folder Select as shown below.

The MP6612i player will only recognize three folder levels and does not display folders containing only other folders. In the example above, the unit will display folders 3, 4, 6, and 8, but not 2 and 7 since they do not contain any tracks directly. Folder 5 is not recognized at all since it is at the fourth level.

Loading an MP3/WMA Disc

After the disc is loaded, “CD Read” is displayed then “MAX” followed by the number of tracks is displayed. The unit will then display ID3 information pertaining to the last selected category (Folder, File, Track, Artist, Album, or Track number and Elapsed time).

Loading an SD Card

Insert the SD card, label side down, into the SD slot on the front of the

MediaLink2. The unit will display “Card Read” and read the files on the card automatically. “SD” is shown in the upper left hand corner of the LCD when in SD mode.

3.5mm

Audio Only

SD SLOT

To remove the card, first press the SRC button (7) to switch to another mode and stop SD playback. Grasp the SD card and pull it straight out. Most cards have a thin recess that helps with removal.

Loading a USB Device

1.Locate the USB jack on the MediaLink2.

3.5mm

Audio Only

USB JACK

2.Insert the USB device into the USB jack. The unit will display “USB Read” and read the files on the device automatically. “USB” is shown in the upper left hand corner of the LCD when in USB mode.

To remove the USB device, press the SRC button (7) to switch to another mode and then remove the USB device from the USB jack.

15

Image 19
Contents Page Page Table of Contents MP6612i Introduction FeaturesPreparation InstallationMounting Sleeve Installation Tools and SuppliesFuses Kit InstallationISO Installation Reconnect BatteryTechnical Assistance Memory/Battery WiringDetaching the Front Panel Front Panel ReleaseRe-attaching the Front Panel Source PowerVolume / Audio Control OperationMid-Range MID LevelClock Set System Menu OperationReset Button Tuner Operation MP6612i CD Player Operation MP3/WMA Operation Loading an SD Card Bit RatesMP3 Playing Order Loading an MP3/WMA DiscTrack Search Accessing the ID3 TagNavigating Folders MP3/WMA SearchCharacter Search Displaying the Identification ID Code Accessing Satellite Radio ModeDirect Tuning Mode Satellite Radio OperationDisplay Modes Category Tuning ModeSelecting a Track Accessing iPod ModeIPod Category Search Hands Free Profile HFP Bluetooth OperationAbout Bluetooth Pairing your Mobile Phone and Head Unit via BluetoothMaking an Outgoing Call Connecting/Disconnecting Your PhoneUsing Speed Dial Managing Incoming CallsAuto Answer BT VolumeDialing a Saved Number Menu ListMP6612i Replacing the Battery Remote ControlOperating Range CD Player Care and MaintenanceProblem Cause Corrective Action TroubleshootingSpecifications CD or Multimedia Radios/Headunits What is covered?What is not covered? Obtaining Warranty ServicePage