Jensen MP1311 Tuner Operation, AM/FM Band Selector Band, Scan Tuning Scan, Preset Stations

Page 10

MP1311

TUNER OPERATION

AM/FM Band Selector (BAND)

Press BAND (5) during radio play to switch between three FM bands and one AM band. “F1”, “F2”, “F3” or “AM” will appear in the display to indicate the band currently selected.

Tuning

Automatic Tuning

Press the Up Tuning (14) button to tune upward in frequency and the Down Tuning (13) button to tune downward in frequency. The unit will automatically stop at the next strong station. If the Local mode is active, the radio will seek the next strong local station when either button is

Scan Tuning (SCAN)

Press SCAN (15) to scan upwards through all the strong channels in the current band. The unit will pause and play each station for five seconds, and the station frequency will flash in the display during this time. Press SCAN again to stop scanning and listen to the current station.

NOTE: The Scan function does not work correctly in “MANUAL” mode.

Preset Stations

Up to six stations on each band can be stored as presets and can then be instantly recalled by pressing the associated preset button on the front panel (16) or remote control. To store a station, turn the radio on and select the desired band and station. Press and hold the desired preset button (numbered one through six on the face of the radio or remote control) for more than two seconds. When stored, the preset number will appear in the display. The station is now stored and can be recalled at any time by pressing the corresponding preset button.

pressed.

Manual Tuning

Press the Up Tuning (14) or Down Tuning (13) button for more than two seconds to select manual tuning mode. “MANUAL” will appear in the display. Press the Up or Down Tuning buttons to move radio frequency up or down two digits at a time. Press and hold the Up or Down Tuning buttons to quickly advance to a certain frequency. Release when the desired frequency is reached. If tuning is not adjusted within five seconds of entering manual tuning mode, the radio will revert to automatic tuning and “AUTO” will appear in the display.

18

20

 

 

 

14

 

 

MP1311 MP3/WMA RECEIVER

 

 

 

MONO

 

 

 

 

 

 

 

 

 

TUNE

 

EQ

 

 

/

 

 

 

 

 

 

 

 

 

 

AUX IN

 

 

SCAN

 

 

 

(7)

MENU

 

 

 

(0)

 

15

17

16

5

13

10

 

 

 

 

 

Image 10
Contents MP1311 Preparation Pre-installation Installation InstructionsUniversal Installation Using Mounting Sleeve ISO Installation Kit InstallationReconnect Battery Remove Radio Wiring FusesOperating Instructions PowerVolume ModeEqualizer Selector EQ Audio Mute MuteBeep Tone Liquid Crystal Display LCDFront Panel Release Reset ButtonDisplay D Auxiliary InputPreset Stations TuningScan Tuning Scan Tuner OperationMono/Stereo Selector Mono Automatically Store / Preset Scan AS/PSPreset Scan Local / Distance SelectorPlay/Pause CD Player OperationInsert CD Disc Scan SCNDisc Shuffle RDM CD Player Error CodesDisc Repeat RPT Disc EjectAcceptable Media MP3/WMA Encoder and CD Writer SettingsMP3/WMA Operation Acceptable Disc FormatsElectronic Shock Protection Entering ID3 TagWriting Files into a Disc Bit RatesIntro Scan SCN PauseNavigating Folders Repeat RPTRoot Directory Search Display InformationDirectory/File Search Current Directory SearchRemote Control MO = MonoCompact Discs Care and MaintenanceCD Player CD-R and CD-RW CapabilityTroubleshooting Problem Cause Corrective ActionSpecifications Limited Warranty