Jensen MP1311 Care and Maintenance, CD Player, Compact Discs, CD-R and CD-RW Capability

Page 19

MP1311

CARE AND MAINTENANCE

CD Player

The following guidelines will help you extend the life of your CD player:

1.When cleaning the vehicle interior, do not get water or cleaning fluids on the unit.

2.The CD player will not operate properly in extreme hot/cold or under damp conditions. In case of such conditions, wait until the vehicle interior reaches a normal temperature or any condensation on the disc player lens has evaporated before using the player.

3.Never insert anything other than round 5” CDs into the player. Attempting to insert CDs of other sizes (even with an adaptor) will cause damage not covered by the warranty.

4.Always remove the CD when the player is not is use.

5.The unit is designed with a vibration dampening CD mechanism to minimize interruption of disc play due to normal vibration in a moving vehicle. However, occasional sound skips may occur when driving on very rough roads. This will not scratch or damage the disc, and normal play will resume when the rough conditions cease.

Compact Discs

CD-R and CD-RW Capability

Depending on media type and method of "recording/burning", some CD-R/RWs may be incompatible with this unit. After "recording/ burning", the session must be closed. Please refer to your software's recommended procedures for closing a disc/session. Review your recording software to familiarize yourself with the correct "recording/burning" procedures. We recommend using the latest versions of

ROXIOTM or NEROTM burning software.

In addition, this unit will only recognize the

CDDA (Compact Disc Digital Audio), .MP3 and .WMA formats "recorded / burned" onto a CD-R/RW.This unit does not support .WAV,

.OGG or other formats.

CD Care and Handling

Dirt, dust, scratches and warpage can cause skips in the playback and deterioration of sound quality. Please follow these guidelines to take care of your compact discs.

1.Carefully wipe fingerprints, dust and dirt from the disc’s playing surface with a soft cloth. Wipe in a straight motion from the inside to the outside of the disc.

2.Never use chemicals such as record sprays or household cleaners to clean

CDs, as they can irreparably damage the disc’s surface.

3.Discs should be kept in their storage cases when not in use.

4.Do not expose discs to direct sunlight, high temperatures or high humidity for long periods.

5.Do not stick paper, tape or CD labels on disc surfaces, as internal damage may occur.

19

Image 19
Contents MP1311 Preparation Pre-installation Installation InstructionsUniversal Installation Using Mounting Sleeve ISO Installation Kit InstallationReconnect Battery Remove Radio Fuses WiringMode PowerVolume Operating InstructionsLiquid Crystal Display LCD Audio Mute MuteBeep Tone Equalizer Selector EQAuxiliary Input Reset ButtonDisplay D Front Panel ReleaseTuner Operation TuningScan Tuning Scan Preset StationsLocal / Distance Selector Automatically Store / Preset Scan AS/PSPreset Scan Mono/Stereo Selector MonoDisc Scan SCN CD Player OperationInsert CD Play/PauseDisc Eject CD Player Error CodesDisc Repeat RPT Disc Shuffle RDMAcceptable Disc Formats MP3/WMA Encoder and CD Writer SettingsMP3/WMA Operation Acceptable MediaBit Rates Entering ID3 TagWriting Files into a Disc Electronic Shock ProtectionRepeat RPT PauseNavigating Folders Intro Scan SCNCurrent Directory Search Display InformationDirectory/File Search Root Directory SearchMO = Mono Remote ControlCD-R and CD-RW Capability Care and MaintenanceCD Player Compact DiscsProblem Cause Corrective Action TroubleshootingSpecifications Limited Warranty