Jensen CD1211 owner manual Troubleshooting, Problem Cause Corrective Action

Page 16

CD1211

TROUBLESHOOTING

Problem

Cause

Corrective Action

 

 

 

Does not operate (display does not

No power to yellow wire; no power to red wire

Check connection with test light; check vehicle fuse with test

light)

 

light.

 

 

 

 

Inline fuse blown

Replace fuse.

No power to unit

Inline fuse blown

Check/replace fuse.

Not all speakers operate

Incorrect splices or connections

Check all splices and connections.

 

Speaker wires shorting to chassis ground or to

Check splices; insulate all bare wires.

 

each other

 

 

 

 

Blows fuses

Power wire shorting to ground

Make sure wire is not pinched.

 

Speaker wires shorting to ground

Make sure wire is not pinched.

 

Incorrect fuse or fuse too small

Install fuse of correct rating.

CD skips too much

Receiver mount is not solid or backstrap is not

Check mounting and backstrap; tighten if needed.

 

secure

 

 

 

 

16

Image 16
Contents CD1211 Preparation Pre-installation Installation InstructionsUniversal Installation Using Mounting Sleeve ISO Installation Kit InstallationReconnect Battery Remove Radio Wiring FusesPower VolumeOperating Instructions ModeAudio Mute Mute Beep ToneEqualizer Selector EQ Liquid Crystal Display LCDReset Button Display DFront Panel Release Auxiliary InputTuning Scan Tuning ScanPreset Stations Tuner OperationAutomatically Store / Preset Scan AS/PS Preset ScanMono/Stereo Selector Mono Local / Distance SelectorCD Player Operation Insert CDPlay/Pause Disc Scan SCNCD Player Error Codes Disc Repeat RPTDisc Shuffle RDM Disc EjectRemote Control MO = MonoCare and Maintenance CD PlayerCompact Discs CD Care and HandlingTroubleshooting Problem Cause Corrective ActionSpecifications Limited Warranty