Jensen CD1211 owner manual Operating Instructions, Power, Mode, Select, Volume

Page 7

CD1211

OPERATING INSTRUCTIONS

Power

Press the power button (1) or any other button on the face of the receiver to turn the unit on when the ignition switch is on. Press the power button again to turn the receiver off. If the radio was left on when the ignition was last turned off, the receiver will turn on automatically when the ignition switch is again turned on. If the receiver was off when the ignition was last turned off, the receiver must be turned on manually when restarting the vehicle.

Mode

Press MODE (2) to select a different mode of operation as indicated on the display panel.

Select

Press the AUDIO CONTROL button (4) to step through the menu of audio functions: volume (VOL), bass (BAS), treble (TRB), balance (BAL), fader (FAD), and volume (VOL). When adjusting audio functions, the unit will automatically exit select mode and return to the normal display after five seconds or when another function is activated.

Bass

Press the AUDIO CONTROL button (4) twice until “BAS” appears in the display. Within five seconds, turn the AUDIO CONTROL (3)

clockwise or counter clockwise to adjust the bass from “-10” to “+10”. “00” represents a flat response. The bass level is shown on the display for five seconds or until another function is activated.

Treble

Press the AUDIO CONTROL button (4) three times until “TRB” appears in the display. Within five seconds, turn the AUDIO CONTROL (3) clockwise or counter clockwise to adjust Treble from “-10” to “+10”. “00” represents a flat response. The treble level is shown on the display for five seconds or until another function is activated.

Available modes include Tuner, CD, and Auxiliary Input. During CD player operation, pressing MODE will change to the tuner mode without ejecting the disc. To access the Auxiliary Input mode, press the MODE button until "AUX" is indicated in the display.

Volume

To increase the volume, turn the AUDIO CONTROL (3) clockwise. To decrease the volume, rotate the AUDIO CONTROL counter clockwise. When volume is adjusted, the volume level is shown on the display panel as a number ranging from “00” (lowest) to “100” (highest).

10

6

 

20

 

 

 

 

14

 

 

 

 

CD1211 CD RECEIVER

 

 

 

 

 

 

 

MONO

 

 

 

 

 

 

 

 

 

 

 

 

 

TUNE

 

 

 

EQ

 

 

/

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AUX IN

 

 

 

 

 

 

SCAN

 

 

 

 

1

4

3

2

8

19

5

9

13

 

 

 

7

 

 

 

 

 

Image 7
Contents CD1211 Preparation Pre-installation Installation InstructionsUniversal Installation Using Mounting Sleeve ISO Installation Kit InstallationReconnect Battery Remove Radio Fuses WiringMode PowerVolume Operating InstructionsLiquid Crystal Display LCD Audio Mute MuteBeep Tone Equalizer Selector EQAuxiliary Input Reset ButtonDisplay D Front Panel ReleaseTuner Operation TuningScan Tuning Scan Preset StationsLocal / Distance Selector Automatically Store / Preset Scan AS/PSPreset Scan Mono/Stereo Selector MonoDisc Scan SCN CD Player OperationInsert CD Play/PauseDisc Eject CD Player Error CodesDisc Repeat RPT Disc Shuffle RDMMO = Mono Remote ControlCD Care and Handling Care and MaintenanceCD Player Compact DiscsProblem Cause Corrective Action TroubleshootingSpecifications Limited Warranty