ENGLISH
12ASSEMBLING AND PREPARING
1 | Raise the monitor up to the maximum height. | NOTE |
|
|
yy An image displayed on the monitor's screen does not rotate according to the screen ori- entation.
Using the Kensington lock
2Adjust the angle of the monitor in the direction of the arrow as shown in the figure.
The Kensington security system connector is locat- ed at the back of the Monitor set.
For more information on installation and usage, refer to the Kensington lock user manual or visit the website at http://www.kensington.com.
Connect the Kensington security system cable between the Monitor set and a table.
3Rotate the monitor clockwise as shown in the figure.
4Complete the installation by rotating the monitor 90° as shown below.
WARNING
NOTE
yy The Kensington security system is optional. You can obtain additional accessories from most electronics stores.
yy Take care when rotating the monitor if the cable is connected.