LG Electronics 27EA83 Installing the wall mount plate, Installing to a wall, Wall Mount Plate

Page 14

ASSEMBLING AND PREPARING 13

Installing the wall mount plate

This monitor supports the specification of the stan- dard wall mount plate or compatible device.

1Place the screen face down. To protect the screen from scratches, cover the surface with a soft cloth.

2Place the wall mount plate onto the monitor and align it with the screw holes.

3Using a screwdriver, tighten the four screws to attach the plate to the monitor.

Wall Mount Plate

Installing to a wall

Install the monitor at least 10 cm away from the wall and leave about 10 cm of space at each side of the monitor to ensure sufficient ventilation. De- tailed installation instructions can be obtained from your local retail store. Please refer to the manual to install and set up a tilting wall mounting bracket.

10 cm

10 cm

10 cm

10 cm

ENGLISH

NOTE

yy The wall mount plate is sold separately.

yy For more information on installation, refer to the wall mount plate's installation guide.

yy Be careful not to use excessive force when mounting the wall mount plate, as this can damage the monitor's screen.

To install the monitor to a wall, attach a wall mount- ing bracket (optional) to the back of the monitor. Make sure that the wall mounting bracket is se- curely fixed to the monitor and to the wall.

1 Use the screws and wall mounting bracket that comply with the VESA standard.

2 Screws which are longer than the standard length may damage the inside of the monitor.

3 A non-VESA standard screw may damage the product and cause the monitor to fall. LG Elec- tronics is not liable for any accidents relating to the use of non-standard screws.

4 The monitor is VESA standard compliant.

5 Use it according to the VESA standard as speci- fied below.

yy 784.8 mm or less

*Thickness of the wall mount plate: 2.6 mm

*Fastening screw: Diameter 4.0 mm x Pitch 0.7 mm x Length 10 mm

yy 787.4 mm or greater

*Use the wall mount plate and screws that conform to the VESA standard.

Image 14
Contents IPS LED Monitor LED LCD Monitor Page Contents License Separate purchase Assembling and PreparingProduct composition Calibrator ACB8300Power Indicator yy On power is on yy Off power is off Component and Button DescriptionMoving and Lifting the Monitor Head Stand Body Installing the MonitorAssembling the stand base Installing onto a table Detaching the stand baseLocking Pin Adjusting the stand heightPin Stand Body Tape Head Locking pinAdjusting the angle Rear Side Front SideTidying cables Pivot feature Head StandUsing the Kensington lock Wall Mount Plate Installing the wall mount plateInstalling to a wall Stand Screw Required Screws Wall Mount Plate ModelVesa a x B OptionalRemoving the Power Adapter Mount Power Adapter MountMounting the Power adapter DVI connection Using the MonitorConnecting to a PC Display port connection Hdmi connectionHeadphone port connection Connecting to AV DevicesUSB 3.0 cable-PC connection Installing TUSB3410 Driver Installing True Color PRO/FINDER To direct sunlight for a long time, this may Installing Screen Split When the installation is complete, restart the system Monitor buttons Customizing SettingsActivating the Main Menu Menu Settings Ratio Settings Wide Original Back Exit Each option is described belowOff Disables the ECO function Reset Resets the ECO data ECO SettingsYou saved 00.00 trees Off Reset Back Exit Menu ECO DescriptionColor Mode Settings Custom sRGB AdobeRGB Calibration Back ExitBack Exit PIP settingsSize Position Picture Sharpness Black Level Response Reset Back Exit TimePicture Gamma ColorSelect to exit the OSD menu Red Green Blue Six ColorBack Exit Sound SettingsLanguage Main Audio Button OSD Locked message is displayed TroubleshootingNothing is displayed on the screen Screen retains an imagePanel Display Settings Color Quality Display color is abnormal27EA83R Specifications27EA83 27EA83R 7.0 kgMode LED Color Power IndicatorPreset Mode, PC Horizontal Frequen Polarity H/V Remarks Cy kHzProper Posture When Using a Monitor Proper PostureDeclaration of Conformity