LG Electronics 27EA83R owner manual Detaching the stand base, Installing onto a table

Page 9

8ASSEMBLING AND PREPARING

ENGLISH

Detaching the stand base

1Place the screen face down.

CAUTION

yy To protect the screen from scratches, cover the surface with a soft cloth.

21 Turn the screw to the left using a coin. 2 Detach the stand base.

CAUTION

yy The components in the illustrations may dif- fer from the actual product.

yy Do not carry the monitor upside down, as this may cause it to fall off its stand and result in damage or injury.

yy To avoid damaging the screen when lifting or moving the monitor, only hold the stand or the plastic cover. This avoids putting unnec- essary pressure on the screen.

Installing onto a table

1Lift the monitor and place it on the table in an upright position.

Place at least 10 cm away from the wall to ensure sufficient ventilation.

10 cm

10 cm

10 cm

10 cm

2Connect the adapter to the monitor, then plug the power cord into the power outlet.

3Press the (Power) button on the bottom of the monitor to turn it on.

CAUTION

yy Disconnect the power cord first, and then move or install the Monitor set. There is risk of electric shock.

Image 9

Contents IPS LED Monitor LED LCD Monitor Page Contents License Product composition Assembling and PreparingSeparate purchase Calibrator ACB8300Component and Button Description Power Indicator yy On power is on yy Off power is offMoving and Lifting the Monitor Installing the Monitor Assembling the stand baseHead Stand Body Detaching the stand base Installing onto a tablePin Stand Body Tape Adjusting the stand heightLocking Pin Head Locking pinRear Side Front Side Adjusting the angleHead Stand Tidying cables Pivot featureUsing the Kensington lock Installing the wall mount plate Installing to a wallWall Mount Plate Vesa a x B ModelStand Screw Required Screws Wall Mount Plate OptionalPower Adapter Mount Mounting the Power adapterRemoving the Power Adapter Mount Using the Monitor Connecting to a PCDVI connection Hdmi connection Display port connectionConnecting to AV Devices USB 3.0 cable-PC connectionHeadphone port connection Installing TUSB3410 Driver Installing True Color PRO/FINDER To direct sunlight for a long time, this may Installing Screen Split When the installation is complete, restart the system Customizing Settings Activating the Main MenuMonitor buttons Menu Settings Wide Original Back Exit Each option is described below Ratio SettingsYou saved 00.00 trees Off Reset Back Exit ECO SettingsOff Disables the ECO function Reset Resets the ECO data Menu ECO DescriptionCustom sRGB AdobeRGB Calibration Back Exit Color Mode SettingsPIP settings Size PositionBack Exit Sharpness Black Level Response Reset Back Exit Time PicturePicture Select to exit the OSD menu ColorGamma Red Green Blue Six ColorSettings Language Main Audio ButtonBack Exit Sound Nothing is displayed on the screen TroubleshootingOSD Locked message is displayed Screen retains an imageDisplay color is abnormal Panel Display Settings Color Quality27EA83 Specifications27EA83R 27EA83R 7.0 kgPreset Mode, PC Horizontal Frequen Power IndicatorMode LED Color Polarity H/V Remarks Cy kHzProper Posture Proper Posture When Using a MonitorDeclaration of Conformity