JL Audio XD200/2 owner manual Input Sensitivity Control, To achieve the desired system balance

Page 7

INPUT SENSITIVITY CONTROL

The control labeled “Input Sens.” can be used to match the source unit’s output voltage to the input stage of the amplifier for maximum clean output. Rotating the control clockwise will result in higher sensitivity (louder for a given input voltage). Rotating the control counter-clockwise will result in lower sensitivity (quieter for a given input voltage.)

To properly set the amplifier for maximum clean output, please refer to Appendix A (page 12) in this manual. After using this procedure, you can then adjust the “Input Sens.” level downward if this is required

to achieve the desired system balance.

Do not increase any “Input Sens.” setting for any channel(s) of any amplifier in the system beyond the maximum level established during the procedure outlined in Appendix A (page 12). Doing so will result in audible distortion and possible speaker damage.

7

Image 7
Contents 200W 2-Channel Amplifier Protect Your Hearing Installation ApplicationsSerial Number A fan. In normal applications, fan-cooling is not necessary Planning Your InstallationSafety Considerations Cooling Efficiency ConsiderationsSecurely mount the amplifier Product DescriptionFuse Requirements Power ConnectionsInput Section TURN-ON LeadInput Voltage Range To achieve the desired system balance Input Sensitivity ControlMost speakers are not designed to reproduce Filter ControlsPreouts Remote Level Control OptionalOr a summed mono center channel Speaker OutputsServicing Your JL Audio Amplifier Problem and turn the volume upJL Audio Technical Support Turn the Input Sens. control all the way down Nine-Step ProcedureAppendix a Necessary EquipmentAppendix C Appendix B My amplifier doesn’t turn on Appendix D TroubleshootingMy amplifier turns on, but there is no output INSTALLATION NOTES Page Page Page International Warranties Limited Warranty Amplifiers USAIf you need service on your JL Audio product JL Audio, Inc