JL Audio XD200/2 owner manual Remote Level Control Optional, Preouts

Page 9

REMOTE LEVEL CONTROL (OPTIONAL)

With the addition of the optional Remote Level Control (HD-RLC), you can control the volume of the XD200/2 from the front of the vehicle. This is useful for subwoofer level control, rear channel level control, center-channel level control or even as a master volume control for the system.

The HD-RLC connects to the jack labeled “Remote Level Control” on the Connection Panel of the amplifier using a standard telephone cable (supplied with the HD-RLC). If desired, multiple XD (and HD) amplifiers can be controlled from a single HD-RLC controller using a simple phone line “splitter” and multiple phone cables.

When connected to the amplifier, the HD-RLC operates as follows. At full counter- clockwise rotation, the audio will mute completely. At full clockwise rotation the level will be the same as if the HD-RLC was not connected at all. In other words, it operates strictly as a level attenuator.

PREOUTS

The XD200/2 incorporates a pass-through preamp output section, so that additional amplifiers can be easily added to the system.

The preamp output delivers the same signal that is connected to the Amplifier Inputs. This can be useful for feeding a subwoofer amplifier when the XD200/2 is being used to drive front speaker systems.

Note: The preamp output signal is not affected by any crossover filter selected (if the input signal is full-range, the preamp output will be full-range).

9

Image 9
Contents 200W 2-Channel Amplifier Installation Applications Protect Your HearingSerial Number Safety Considerations Planning Your InstallationCooling Efficiency Considerations A fan. In normal applications, fan-cooling is not necessarySecurely mount the amplifier Product DescriptionFuse Requirements Power ConnectionsTURN-ON Lead Input SectionInput Voltage Range To achieve the desired system balance Input Sensitivity ControlMost speakers are not designed to reproduce Filter ControlsPreouts Remote Level Control OptionalOr a summed mono center channel Speaker OutputsProblem and turn the volume up Servicing Your JL Audio AmplifierJL Audio Technical Support Appendix a Nine-Step ProcedureNecessary Equipment Turn the Input Sens. control all the way downAppendix C Appendix B My amplifier doesn’t turn on Appendix D TroubleshootingMy amplifier turns on, but there is no output INSTALLATION NOTES Page Page Page If you need service on your JL Audio product Limited Warranty Amplifiers USAJL Audio, Inc International Warranties