JL Audio SB-T-TUNDCMAX/13TW5/DG, SB-T-TDCMAX/13TW5 warranty E P 1 2 d e t a i l, JL Audio, Inc

Page 3

S T E P 1 1

Enlarge 1/8" hole drilled in step 5 through the metal panel to 3/8" as was done on the plastic panel. Repeat this step if installing second Stealthbox®.

S T E P 1 2

Install included hardware as shown in the picture at left and the illustration below. Repeat this step if installing second Stealthbox®.

 

S T E P 1 2 ( d e t a i l )

REMOVEABLE INTERIOR

 

REAR WALL

 

 

FENDER WASHER

FENDER WASHER

 

 

HEX NUT

HEX HEAD BOLT

LOCK WASHER

 

 

FRONT OF TRUCK

S T E P 1 3

Tighten this hardware down using either a deep-well socket and a wrench (as shown) or two wrenches. You want to make sure that this hardware won’t move, as this will be how the Stealthbox® is secured to the truck.

SB-T-TDCMAX/13TW5 INSTR_SKU# 011266

S T E P 1 4

Reinstall rear interior metal panel, making sure the the bolt(s) that were installed in Step 13 are facing forward. Use cau- tion so that the cable that was un-plugged in Step 8 does not get pinched between the removeable panel and the back of the cab. Plug the cable back in to where it was unplugged.

S T E P 1 5

Re-install the rear plastic trim panel. We found that lining up the recently installed stud with the hole previously drilled in the panel to the outside (drivers side) made alignment easier. Ensure that all of the plastic plugs line up with their correct receptacles and press them in place. Continue towards the center of the truck. The rear panel can be installed in two pieces which may make alignment easier. Make sure that the second stud (for the second Stealthbox® if installed) and the rest of the plugs line up.

S T E P 1 6

Re-install the two anchors that were removed in Step 6.

S T E P 1 7

If installing two Stealthboxes®, install the driver side enclosure first. Align the enclosure so that the stud goes through the previously enlarged guide hole Step 4. Start the hardware on the stud using a large fender washer close to the fiberglass, a split lock washer then the nut (see Step 18). Be cautious not to overtighten the nut, it only needs to be snug.

Page 3 • JL Audio, Inc 2008

Continued on Next Page

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Estimated Time E PTest Stealthbox for proper operation before continuing Please follow safe drilling procedures E P 6 d e t a i lE P 1 3 JL Audio, Inc E P 1 2 d e t a i lD / H I G H F r e q u e n c y D r i v e r F I T M E N T C L U D E D H a R D W a R E P E R S T E a L T H B OE P 2 W e r R e c o m m e n d a t i o n

SB-T-TDCMAX/13TW5, SB-T-TUNDCMAX/13TW5, SB-T-TUNDCMAX/13TW5/DG specifications

The JL Audio SB-T-TUNDCMAX/13TW5 is a premium subwoofer enclosure specifically designed for the 2007-2021 Toyota Tundra. This enclosure is engineered to accommodate the 13TW5 subwoofer, which is renowned for its compact design and high-performance capabilities. JL Audio has mastered the balance between size and sound, making this setup an excellent choice for truck owners who desire powerful bass without sacrificing valuable cargo space.

One of the standout features of the SB-T-TUNDCMAX/13TW5 is its unique fiberglass construction. This durable material is engineered to provide excellent acoustic properties, ensuring that sound waves are efficiently produced without distortion. The enclosure is designed to fit snugly under the rear seat of the Tundra, maintaining a factory look while keeping the subwoofer secure and protected from the elements.

Another impressive characteristic of the SB-T-TUNDCMAX series is the 13TW5 subwoofer itself. This dual 2-ohm voice coil subwoofer features a shallow mounting depth, allowing it to fit into tight spaces while still delivering astonishing sound quality. With a peak power handling of 1,000 watts and RMS power handling of 600 watts, the 13TW5 is capable of producing deep, resonant bass that can fill any cabin with adequate low-end frequencies.

The design of the SB-T-TUNDCMAX system emphasizes low-frequency response and efficiency. The enclosure is meticulously tuned to provide the ideal air space for the subwoofer, ensuring maximum performance and minimal distortion. The subwoofer's patented technology includes a durable, cast-alloy frame that reduces flex and enhances overall sound clarity.

Additionally, the enclosure is equipped with a sleek, automotive-grade finish, enhancing the aesthetic appeal and making it a perfect addition to any Tundra. The overall integration of design, technology, and construction ensures that the SB-T-TUNDCMAX/13TW5 delivers not just sound, but a profound auditory experience that resonates with truck enthusiasts looking for a premium audio solution.

In conclusion, the JL Audio SB-T-TUNDCMAX/13TW5 is a top-tier subwoofer and enclosure combination that stands out in the realm of automotive audio. Its innovative design, powerful subwoofer, and commitment to sound quality ensure that Tundra owners experience the best in car audio, providing compelling bass that transforms any driving experience.
Top Page Image Contents