JL Audio SB-P-CYNNE/10W6v2/BK warranty Remove the plastic collar that is around the hinge pin

S T E P 1 2

Remove the plastic collar that is around the hinge pin.

S T E P 1 3

Remove the trim panel.

S T E P 1 4

With a 17mm socket and ratchet, remove the seat belt retracting unit.

S T E P 1 5

Remove the plastic ring from the rear seat’s upper latch pin.

SB-P-CYNNE/10W6v2/BK_INSTR_SKU#011231

S T E P 1 6

Pull the SRS plastic badge from the upper c-pillar trim.

With a T-25 socket, remove the bolt that has been exposed.

S T E P 1 7

An airbag is located behind the c-pillar trim. Use caution while removing this panel. All wiring/connections should be protected.

As in the illustration, reach around to the rear of the c-pillar trim and carefully remove the c-pillar trim from the c-pillar, by pulling towards you.

S T E P 1 8

With a T-25 socket remove the bolt that secures the front of the side trim panel to the c-pillar.

S T E P 1 9

From the driver’s side rear door opening. Pull the front of the cargo side trim panel from the vehicle’s body. Do not fully remove this side trim panel at this time.

Page 3 • JL Audio, Inc 2007 Continued on Next Page