JL Audio SB-P-CYNNE/10W6v2/BK warranty E P 1

S T E P 4

Remove the bottom sill plate.

S T E P 5

Remove the lower d-pillar trim.

S T E P 6

Remove the top sill plate.

S T E P 7

Remove the plastic cover from the upper d-pillar trim. Remove the phillip head screw that has been exposed .

SB-P-CYNNE/10W6v2/BK_INSTR_SKU#011231

S T E P 8

Remove the upper d-pillar trim.

S T E P 9

With a T-30 socket, remove the bolt and metal bracket that is located between the two rear seats.

S T E P 1 0

Grab a hold of the back of the driver’s side rear seat as in the picture.

Lift the right side of the seat up and out of the hinge bracket.

Pull the left side of the seat towards the middle of the vehicle, sliding the seat off of a hinge pin.

Once the seat is off both hinge points, remove the seat from the vehicle.

S T E P 1 1

Flip the driver’s side rear bottom cushion towards the front of the vehicle.

Page 2 • JL Audio, Inc 2007 Continued on Next Page