Therma-Tru Swing-in Fiber-Classic⎠Door System Specifications, Sills, Swing-In, SWING-OUT, Patio

Fiber-Classic⎠Door System Specifications

DOOR PANELS	Faces: 1/16-inch minimum	thickness, fiberglass-reinforced thermoset composite,
	wood-grained in natural northern red oak patterns, stainable and paintable. Door edges:
	machinable kiln-dried pine, primed to match color of faces, lock edge reinforced with
	engineered lumber core, lockset area reinforced with solid blocking for hardware
	backup. Door bottom edge: moisture-proof and decay-proof composite. Core:
	foamed-in-place polyurethane, CFC-free, density 2.0 pcf minimum, K-factor of 0.15 for
	minimum thermal transmittance. Standard factory sizes may be edge trimmed or end
	trimmed in shop or field to suit replacement door size requirements.
OPTIONAL	Factory-glazed: perimeter moldings flush with skin and made as integral part of skin.
FACTORY-GLAZED	Glass minimum 1/8-inch tempered, two thicknesses with sealed airspace between air-
GLASS OR GLASS	space typically 3/8-inch. Options for grooved Bevelline, Low-E or grille between glass
INSERTS	(GBG). Optional removable wood grilles.
	Inserts (lites): perimeter frames in raised-molding patterns, molded from proprietary
	composite, wood grained to match door faces, stainable or paintable, screw-fastened to
	doors, screw holes concealed with grain-matched plugs in matching material and finish.
	Glass minimum 1/8-inch tempered, two thicknesses with sealed airspace between,
	airspace typically 3/4-inch. Options for leaded decorative glass triple-glazed in air space
	between tempered glass faces with solid brass or zinc caming. Options for grooved
	Bevelline glass or etched glass. Optional removable wood grilles.
OPTIONAL	Molded from proprietary composite, wood grained to match door faces, stainable or
DECORATIVE PANELS	paintable, screw-fastened to doors, screw holes concealed with grain-matched plugs in
	matching material and finish.
GASKETING,	Swing-in models: jacketed thermoset closed-cell foam, press-fit in kerfs at jamb stops in
WEATHERSTRIPPING	frames. Extruded thermoplastic elastomer, finned and chambered design, press-fit into
	bottom edge of doors. Corner pads at bottom margin corners from jacketed thermoset
	closed-cell foam.
	Swing-out models: same weatherstrip as swing-in models, bottom gaskets integral
	with sills.
HINGES, STRIKES	Steel, zinc-plated, brass or chrome finish.		Screws plated and finished to match
	hardware. Min-imum hinge size 4 x 4 x .098 inches. Strikes are proprietary adjustable
	type, permitting in-out adjustment of door in frame, up to 3/16 inch.
FRAMES	Milled from 5/4 kiln-dried pine, profiled with 1/2-inch stop, minimum depth 4-9/16-
	inches. Other frame depths available to match wall constructions. Exterior casing
	brickmould in WM180 pattern available. Optional maintenance-free clad frames and
	brickmoulds are prefinished white.
SILLS, SWING-IN,	Wide range of sill options:	thermally-broken fixed, adjustable with oak threshold,
SWING-OUT, PATIO	swing-in, swing-out, public-access, aluminum, brass or bronze anodized finish.
DOOR, SIDELITE
OPTIONS	Double-door and hinge patio door models:		double door in 6/8 height and 8/0 height
	available with both leaves active and locking astragal available, hinge patio doors in
	standard 6/8 height, replacement 6/6 height and 8/0 height available, patio models
	available in two-panel and three-panel options (one door active, others stationary).
	Sidelite options: flush-glazed lite models, raised molding models, and raised panel
	models with panels flush with doors all available to match doors, in 12-inch and 14-inch
	widths. Sidelite systems available with mullions separating doors from sidelites, and
	continuous sills and frame head, or as separately framed and cased units, joined together.
TRANSOM OPTIONS	Transom frames, either rectangular or elliptical, match door frames and have matching
	exterior brickmould. Clear insulated glass or with decorative leaded glass, leaded brass
	with solid brass or zinc caming. Optional removable muntins for divided-lite look in
	rectangular transoms.

SPEC

Door System Specifications

Issued: Oct 2008