| | | | | | | Construction Series Steel Door |
| | | | | | | System Specifications |
| | | | | | | ⎠ | |
| | | | |
| | |
| DOOR PANELS | Faces: .018-inch (25 gauge) minimum thickness, tension-leveled cold rolled steel, zinc- |
| | | | | | | coated, conversion-coated to permit paint bond. | Door edges: machineable kiln-dried |
| | | | | | | pine, mechanically locked to door faces, four-sided full thermal break provided. May be |
| | | | | | | prepared for cylindrical locksets. Door bottom edge: moisture-proof and decay-proof |
| | | | | | | composite. Core: foamed-in-place polyurethane, CFC-free, density 2.0 pcf minimum, |
| | | | | | | K-factor of 0.15 for minimum thermal transmittance. All door surfaces factory primed. |
| | |
| OPTIONAL GLASS | Inserts (lites): perimeter frames in raised-molding patterns, frame moldings molded or |
| INSERT LITES | extruded from proprietary thermoplastic compounds formulated for exterior exposure |
| | | | | | | and weatherability. Certified to withstand high service temperatures resulting from |
| | | | | | | exposure behind storm doors or dark finishes. Frames paintable, screw-fastened to |
| | | | | | | doors, screw holes concealed with grain-matched plugs in matching material and finish. |
| | | | | | | Glass minimum 1/8-inch tempered, two thicknesses with sealed airspace between, |
| | | | | | | airspace typically 1/4-inch. | |
| | |
| GASKETING, | Swing-in models: magnetic option or jacketed thermoset closed-cell foam, press-fit in |
| WEATHERSTRIPPING | kerfs at jamb stops in frames. Extruded thermoplastic elastomer, finned and chambered |
| | | | | | | design, press-fit into bottom edge of doors. Corner pads at bottom margin corners from |
| | | | | | | jacketed thermoset closed-cell foam. | |
| | | | | | | Swing-out models: same weatherstrip as swing-in models, bottom gaskets integral with |
| | | | | | | sills. | |
| | | |
| HINGES, STRIKES | Steel, zinc-plated, brass or chrome finish. | Screws plated and finished to match |
| | | | | | | hardware. Min-imum hinge size 4 x 4 x .098 inches. Strikes are proprietary adjustable |
| | | | | | | type, permitting in-out adjustment of door in frame, up to 3/16 inch. |
| | |
| FRAMES | Milled from 5/4 kiln-dried white pine, profiled with 1/2-inch stop, minimum depth |
| | | | | | | 4-9/16-inches. Other frame depths available to match wall constructions. Exterior |
| | | | | | | casing brickmould in WM180 pattern available. | |
