Jensen 525, 693, 65C installation manual Basic Installation Steps

INSTALLATION

Basic Installation Steps

Step 1: Remove existing speaker.

Step 2: Position new speaker and align with existing mounting holes, when possible.

Step 3: Attach the positive (+) and negative (-) speaker terminals to both the woofer and tweeter (see FIGURE 2). Be sure to observe proper polarity when connecting the wires.

Step 4: If not using factory grilles, attach grille.

Step 5: Mount speaker (using factory hardware when possible).

Step 6: Reconnect negative battery terminal.

FIGURE 1 - DOOR PANEL INSTALLATION

Grille Speaker Door Panel

FIGURE 2 - CONNECTING SPEAKER WIRES

Copper Wire = Positive

Silver Wire = Negative

FIGURE 3 - REAR DECK INSTALLATION

3