CA R BON Speakers >>
INSTALLATION
Installing the Tweeter for the 65C
The separate tweeters included with the 65C have a variety of mounting applications. During installation, make sure the tweeter is positioned and aimed towards the listener's ears.
| There is a switch inside the Carbon 65C crossover | |
| that can be used to adjust tweeter attenuation. 0dB is | |
NOTE | for a flat tweeter response curve relative to the | |
woofer, while +3dB will boost the tweeter's frequency | ||
| ||
| response by 3dB throughout it's frequency range. | |
| Placement of this switch will depend on tweeter | |
| positioning and listener preference. You may want to | |
| try different positions of this switch before final | |
| installation is complete. | |
|
|
FIGURE 4 - TWEETER ASSEMBLY |
FIGURE 5 - WIRING THE BANDPASS/TWEETER |
0dB +3dB |
4