Marantz PM-14S1 owner manual Adjusting the left and right channel balance, Adjusting the tone

Turning off the sound temporarily

Press ATT.

“ATT” appears on the display and the sound is muted.

•To restore the sound, press the button again.

To restore the sound, press the button again.

Adjusting the left and right channel balance

The volume level of the left and right channels can be trimmed in 0.5 dB steps across a 0.0 – 9.0 dB range.

The factory default setting is 0.0 dB (maximum).

1 Press MENU.

The unit enters the level adjustment mode.

•The left channel level value flashes.

ENGLISH

Adjusting the tone

1 Press TONE.

The TONE indicator lights, and the mode switches to the tone adjustment mode.

2 Turn BASS and TREBLE to adjust the tone.

Press TONE again to switch the tone adjustment mode off. The TONE indicator turns off.

Preparation

Connections

Setting the attenuation level when sound is muted

The attenuation level can be set at –20 dB, –40 dB, or –∞.

•The factory default setting is –20 dB.

1Press and hold ATT on the unit for 2 seconds or longer.

The attenuation level will appear on the display.

2 Use df to adjust the left channel level.

3 Press 1.

The adjustment mode selects the right channel.

•The light channel level value flashes.

Playback

2 Press ATT on the unit.

The attenuation level setting value changes each time the button is pressed.

If not operated for 2 seconds, the current setting is saved and the display returns to normal.

4 Use df to adjust the right channel level.

5 Press MENU.

The unit exits the adjustment mode.

•If you have connected a “SLAVE” device using the F.C.B.S. connection (vpage 10), proceed to the slave setting.

Settings

Tips

Appendix

17