ENGLISH
F.C.B.S. connection
Connection for 5.1 multi-channel playback
The three units are connected using F.C.B.S. For the F.C.B.S connection, prepare 3 audio connection cables, and refer to F.C.B.S. ( vpage 10). Connect the outputs of players that have 5.1 channel analog outputs to each of the three units.
If using a subwoofer, see the owner’s manual that came with the subwoofer for further instructions.
Set the ID numbers for the three amplifiers as explained in How to set ID number for F.C.B.S. (vpage 18).
• When the ID 1 unit is operated, ID 2 and ID 3 units will operate in sync.
Super Audio CD multi-channel player, etc.
MULTI CHANNEL AUDIO OUT
FRONT R | FRONT L SURROUND R SURROUND L |
: Signal flow
•Set SPEAKER button on front panel in ON position.
•Set to “STEREO”.
For front L/R speakers
Set
To power
outlet.
•Set SPEAKER button on front panel in ON position.
•Set to “STEREO”.
For center speaker or subwoofer
Set PM-14S1 to ID 2.
To power
outlet.
To line input jack
•Set SPEAKER button on front panel in ON position.
•Set to “STEREO”.
For surround speakers
Set PM-14S1 to ID 3.
To power
outlet.
R channel front | L channel front | subwoofer | Front center | R channel | L channel |
speaker | speaker |
| speaker | surround | surround |
|
|
|
| speaker | speaker |
12