3. Radio Operation
1. PRESET STATION [ 1-6 ] BUTTONS
A]. To memorize the current frequency, press any one of the six preset
B]. To recall the preset memory, press one of the preset buttons
2. AS/PS BUTTON
A)When shortly pressing the APS button on the front panel or the A/P button on the remote control, the radio searches for each preset station stored in the current band from the preset station 1. At the time, the name of the band, the frequency of the preset station and the name of the number button, will display on LCD, and it will display for 5 seconds for every preset station. after searching the preset stations for a circle, it will stop searching and listen to the preset station 1.
B)When long pressing the APS or A/P button (more than 1 second), the radio searches from the current frequency and checks the signal strength level in the current band until 1 cycle searching is finished. And then the 6 stations of the strongest signal will preset to the corresponding memory banks of the number buttons. When the AS operation is finished, the radio will listen to the preset station 1. (For the 3 bands of the FM1/FM2/FM3, the AS operation will be finished once a time. It can store 3x6 FM stations and 2x6 AM stations)
3.BAND BUTTON
In RADIO mode, press BAND button on the remote control or on the front panel to select your desired radio band and word which band is selected will be displayed on LCD.
4.TUNE/SEEK UP/DOWN BUTTONS
Press ^ or v button on the remote control or >> or << button on the front panel to manually tune up or down for your desired station. Press them hold for more than 2 seconds to automatically tune up or down for the stronger station.
5.STEREO/MONO BUTTON
Press ST button on the remote control to select STEREO or MONO sound mode for FM band.
6.LO/DX BUTTON
In RADIO mode, when the signal of the distance radio station are very weak and the receiving effect is bad during tuning, check whether there is the word LOC on LCD or not. If there is the word LOC on LCD, press this button to turn off the LOC function, then tune again for the distance radio station; when the signal of the local radio station are too strong to lead that the interference to the receiving local radio station is very strong during tuning, press this button to turn on the LOC function to display the word LOC on LCD, then tune again for the local radio station.
5.12 Change Audio Language
1.In the state of DVD disc playing, press the AUDIO button repeatedly on the IR remote control to select the desired language type. (depend on the disc used)
2.In the state of MP3/WMA disc playing, the AUDIO button on the IR remote control is not available.
3.In the state of VCD/CD disc playing, press the AUDIO button repeatedly to select LEFT MONO, RIGHT MONO,
5.13 Changing of Video Signal System
During playback of DVD/VCD disc, press the P/N button repeatedly to change VIDEO SIGNAL SYSTEM mode as follows:
5.14 Look over Sequence Number or Playback Time of Title/Chapter/Track
1.In the state of DVD disc playing, press the OSD button repeatedly on the remote control to display: Title Elapsed, Title Remain, Chapter Elapsed, Chapter Remain and Display Off.
2.In the state of VCD disc playing, press the OSD button repeatedly on the remote control to display: Single Elapsed , Single Remain , Total Elapsed, Total Remain and Display Off.
3.In the state of CD disc playing, press the OSD button repeatedly on the remote control to display: Single Elapsed, Single Remain, Total Elapsed, Total Remain.
4.In the state of MP3/WMA disc playing, press the OSD button repeatedly on the remote control to display: Filelist Repeat Off, Filelist Repeat On.
5.15 Playback the Picture CD in JPEG Format
1.The root menu is displayed on TV when beginning to switch on DISC mode.
2.When displaying the root menu, press the direction buttons to select your desired JPEG picture file, then press the OK or PLAY button to display the JPEG picture in full screen from the JPEG picture of the selected file.
When displaying the root menu, you can also use the number buttons to select the serial number of the JPEG picture file and display the JPEG picture in full screen from the JPEG picture of the selected file.
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com