1.3Maintenance and Cleaning of Discs Disc Maintenance
1.To keep the disc clean, handle the disc by its edge, do not touch the disc surface of the play side.
2.Do not stick paper or tape on the disc. If there is glue (or analog) on the disc surface, must wipe it up before using.
3.Do not expose the disc to direct sunlight, or nearby heat sources such as caliduct, or leave it in a car parked in direct sunlight where there can be a considerable rise in temperature.
4.Put the disc inside disc case to keep temperature after finishing playback.
Disc Cleaning
1.Before playing, wipe the disc with a clean lint. wipe the disc outwards from the disc center.
2.Do not use petrel, thinner, commercially cleaner or
+ side up
|
| B |
|
| A |
Fig.1 | Fig.2 | Fig.3 |
1.4 Battery Information of Remote Control
Replace Battery in Remote Control:
1.Before using the remote control for the first time, pull the insulating sheet out of the remote control as the direction indicated by the arrow.(see fig.1)
2.Press the movable block hold as the direction indicated by the A arrow (See fig.2), then pull the battery holder out of the remote control as the direction indicated by the B arrow(see fig.2).
3.Replace the old battery by a new battery with (+) polarity side upward. (See fig.3).
4.Insert the battery holder to the original position in remote control. (See fig.3).
Note about the Battery of Remote Control:
1.Improper use of battery may cause overheating or explosion. so that Result in injury or fire .
2.Battery leakage may cause damage to the remote control(Battery Life: 6 months with normal use in normal room temperature).
3.Do not short the battery.
4.Do not throw the battery into the fire.
5.To avoid the risk of accident, keep the battery out of reach of children.
| 6. Trouble Shooting |
|
|
|
| Symptom |
| Cause | Solution |
|
| |||
|
|
|
|
|
| Power does not |
| IR Remote not | Check the IR remote |
| turn on |
| functioning. | For a good battery. |
|
|
|
|
|
| DVD Disc does |
| Another disc is | Eject first DVD disc |
| not insert. |
| Already in unit. | And insert another |
|
|
|
| into unit. |
| The disc is ejected |
| The disc has | Insert the disc with |
| as soon as it is |
| been inserted | the label side up. |
| inserted. |
| Upside down. |
|
|
|
|
|
|
| Sound skips or |
| Disc is dirty. | Clean the disc with |
| noisy. |
|
| A soft cloth. |
|
|
| Disc is seriously | Replace the disc |
|
|
| scratched or | with no scratches. |
|
|
| warped. |
|
|
|
|
|
|
| Sound is bad |
| Condensation may | Let dry for about |
| after power is |
| have formed on the | one hour with the |
| turned on. |
| Internal lens when | power turned on. |
|
|
| The car is parked in |
|
|
|
| a humid place. |
|
|
|
|
|
|
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com