Magnadyne M3-LCD, M4-LCD installation manual Sound Controls, Reset, Equalizer Interface

System Setup (Continued)

Reset:

1.Press the button to reveal more setup features.

2.Type “5365” as the password then press the

button.

3.The unit will reset the radio area and wallpaper to factory default settings.

NAV

Sound Controls

Volume:

Increase the volume by pressing the + side of the button.

Decrease the volume by pressing the - side of the button.

Increase

Decrease

Equalizer Interface:

Enter the Equalizer Interface from the majority of source menus.

Equalizer Presets:

Press the or to access the pre-defined equalizer setting. Choose between: Optimal, EQ OFF, Pop, Rock, Metal, Dance, Electronic, Country, Jazz, Classical, Bluesy, Old, Operatic, Speech and UserDefine. Press to save and return to previous source.

Note 1: Each one of these pre-defined equalizer setting can be customized to fit your taste. Select the equalizer setting you want to adjust then use the or buttons to adjust the sound.

Note 2: To reset the pre-defined equalizer set- tings to factory specifications press and hold the

button for a few seconds.

Loudness:

To boost high and low tones at low volume

levels, press the button to activate Loud.

Press the button to deactivate the Loud feature.

Turning Off the Equalizer:

To deactivate the graphic equalizer press the button. Press the button to activate the equalizer.

NAV

Pre-defined Equalizer Setting

NAV

NAV

9