Installation
Step 1: The radio chassis is designed to be “Sleeve Mounted” through an opening in the dashboard panel. The required opening size is 182mm
Step 2: Insert the mounting sleeve into the opening in the dashboard. Bend the metal tabs on the sleeve to secure the mounting sleeve to the dashboard.
Step 3: Bring all wiring for the connection of the unit (including the antenna) through the center of the mounting sleeve.
Sheet Metal
Screw
Nut
Washer
Metal Strap
Dashboard | Mounting Sleeve |
Removing the Unit:
To remove the radio after installation, insert the removal keys straight back until they click. Push the keys outward. Then pull the radio out.
Note: If the removal keys are inserted at an angle they will not release the radio.
Insert Removal
Keys Here
49