Channel Skip Sirius Satellite Radio

Programming Channel Skip for Satellite Radio Stations: You can program the radio to skip channels which you do not want.

1.Tune to the station to be skipped (see Sirius Satellite Radio Operation for more details).

2.Push the TUNE knob until “SET SKIP” appears in the display.

TUNE/TRACK/CH

PUSH

SCAN/S-MOD

ENTER

3.Push the BAND button and “SKIP” will appear flashing in the bottom of the display. When the “SKIP” stops flashing the channel has been pro- grammed to skip.

BAND W-BND

Release Channel Skip for Satellite Radio Stations:

1.Push the TUNE knob until “DIRECT” appears in the display.

2.Rotate the TUNE knob and select the first digit of the skipped channel (0 or 1).

3.Push the TUNE knob again.

4.Rotate the TUNE knob and select the second digit of the skipped channel (1-8).

5.Push the TUNE knob again.

6.Rotate the TUNE knob and select the third digit of the skipped channel (1-9). The tuner will start playing the station you have selected when the third digit stops flashing.

TUNE/TRACK/CH

PUSH

SCAN/S-MOD

TUNE/TRACK/CH

PUSH

SCAN/S-MOD

7.Push the TUNE knob until “SET SKIP” appears in the display. After a few seconds the radio channel will appear in the display with “SKIP” flash- ing at the bottom.

8.Push the BAND button and “SKIP” will stop flashing in the bottom of the display. When the “SKIP” disappears the channel has been released from Channel Skip.

TUNE/TRACK/CH

PUSH

SCAN/S-MOD

ENTER

BAND W-BND

Auxiliary Input

Selecting Auxiliary Input: Push the MODE button until “AUX1” or “AUX2” appears in the display which indicates that the auxiliary unit is playing through the M9900CDS.

Note: All sound controls (pages 5-6) are active when the Auxiliary source is playing.

MODE AS/PS