Magnadyne M9900CDS manual Preset Sirius Satellite Radio Stations, Direct Tuning

Sirius Satellite Radio Operation (Continued)

Category Tuning (continued):

3.Rotate the TUNE knob and select a station.

TUNE/TRACK/CH

PUSH

SCAN/S-MOD

Direct Tuning:

1.Push the TUNE knob until “DIRECT” appears in the display.

2.Rotate the TUNE knob and select the first digit (0 or 1).

3.Push the TUNE knob again.

4.Rotate the TUNE knob and select the second digit (1-8).

5.Push the TUNE knob again.

6.Rotate the TUNE knob and select the third digit (1-9). The tuner will start playing the station you have selected when the third digit stops flashing.

TUNE/TRACK/CH

PUSH

SCAN/S-MOD

TUNE/TRACK/CH

PUSH

SCAN/S-MOD

Preset Sirius Satellite Radio Stations

Programming Satellite Radio Stations: You can program up to 20 Sirius Satellite radio stations.

1.Select from SR1, SR2, SR3 or SR4 by pushing the BAND button repeatedly.

2.Tune to the desired radio station (see Sirius Satellite Radio Operation for more details).

3.Push and hold one of the five STATION RECALL buttons

until a short "beep" is heard. The corresponding preset		2	3
button number now appears in the lower right hand	MEMORY	PROGRAM	REPEAT
corner of the display.

4.To program additional preset stations, repeat this procedure using the other STATION RECALL buttons as desired.

BAND W-BND

4	5
SHUFFLE	INTRO

Recalling Satellite Radio Stations:

1.Select from SR1, SR2, SR3 or SR4 by pushing the BAND button repeatedly.

2. Push button 1, 2, 3, 4 or 5 to recall a pre-programmed

radio station. MEMORY

		BAND	W-BND
2	3	4	5

PROGRAM REPEAT SHUFFLE INTRO

Automatically Recalling Satellite Radio Stations:

1.Select from SR1, SR2, SR3 or SR4 by pushing the BAND button repeatedly.

2.Push AS/PS button and release to automatically scan every 5 seconds the pre-programmed radio stations. To stop scanning push the AS/PS button again.

BAND W-BND

MODE AS/PS

9