Magnadyne M9900CDS manual Speciality Features, Problem Description Possible Remedy

Speciality Features

Display Button: The factory default setting is clock display priority. Push the DISPLAY button at any time will display the radio frequency, CD track, AUX 1 or AUX 2.

Note: In the Sirius mode the factory default setting is Sirius channel dis- play priority. Push the DISPLAY button at any time to display the CN-NAME, SONG TITLE, ARTIST, CATEGORY and Clock. If clock is cho- sen the time will be displayed for approximately 5 seconds then revert to displaying the Category.

EQ DISP

Reset Button: The radio panel or LCD display may fail to function normally due to the vehicle’s battery condition, and may require resetting the radio microprocessor if:

•The vehicle has been “jump started” from a dead battery condition.

•The vehicle battery becomes very low and is quick-charged.

•The vehicle battery is removed and replaced.

Should this condition occur, simply press and release the RESET button on the radio panel using the tip of a ball point pen. This will reset the radio microprocessor to the original factory settings. After pressing the RESET button you should recheck to see if the radio functions normally. All station programming should remain, but you will have to reset the clock. Should the LCD display area show any abnormal error code, please refer to the trouble shooting guide and solution chart below.

	LOUD	MU
	EQ	DIS
	ENTER
INTRO	BAND	W-B

Error Code	Problem	Description	Possible Remedy
ERR 1	Mechanism Problem	Unknown mechanical	1.	Eject the disc and try another.
		problem with the CD	2. Press the reset button.
		mechanism.	3.	Replace the unit.
ERR 2	TOC Reading Error	Laser can not read the	1.	Insert a different disc.
		CD disc table of	2.	Check disc for excessive scratches.
		contents.	3.	Check disc for dirt and fingerprints.
				Clean disc and reinsert.
ERR 3	Error from High	The temperature of the	Reduce the temperature inside the vehicle
	Ambient Temp.	mechanism is too high	and try to play a CD at a later time.
		to play CDs without
		damaging them.
ERR 4	Laser Focus Error	Laser pickup fails to	1.	Insert a different disc.
		focus and read the disc.	2.	Check disc for excessive scratches.
			3.	Check disc for dirt and fingerprints.
				Clean disc and reinsert.
			4. Press the reset button.
ERR 6	CD Loading Error	The loading mechanism	1.	Push the reset button.
		is damaged.	2.	Replace the unit.
ERR 7	Laser Servo Error	Laser servo is not	1.	Press the reset button.
		functional.	2.	Replace the unit.

11