Controls | Volume | Play/ | Volume |
Down | Reverse Pause Forward | Up |
Model: SPK300K/W
Rise - Ultra Portable Bluetooth Speaker
PLEASE READ THIS INFORMATION THOROUGHLY BEFORE USING THIS PRODUCT. IT CONTAINS IMPORTANT OPERATING INSTRUCTIONS FOR YOUR UNIT.
Owner’s manual
Thank you for purchasing the SPK300K/W. The SPK300K/W oers superb sound in a portable stylistic desktop design, an ideal audio companion to any smartphone. The SPK300K/W is powered by its built in
•Volume control: to adjust the volume during music playback or a phone call, press the + to adjust the volume up, or - to adjust the volume down.
•FWD / REV: During music playback you can use the (sy to forward to the next track and the (sy to go back to the previous track.
•Pause: Press the 
and the speaker will pause the track in
progress until you press the 
again to resume play.
Rechargeable Built in Battery
Charging | Mic |
LED |
|
wireless standard.
When the built in battery becomes weak the SPK300K/W will sound a beeping alert. The LED will ash red and blue quickly (8 times every second, red light interval every 4 seconds. You will need to charge the
Package Contents
SPK300K/W, USB charging cable, and user manual
Charging your SPK300K/W
Note: Prior to initial use, fully charge the SPK300K/W.
Push the top of the SPK300K/W down as shown, to open the unit.
Connect the SPK300K/W using the included
LED Charging Indicator
USB
AUX | MIC |
|
SPK300K/W as mentioned previously. (You can play music at the same time the SPK300K/W is charging)
Connecting to Non-Bluetooth devices
You can use a 3.5mm auxiliary cable (not included) to connect to devices not containing Bluetooth for music playback. Whenever you connect to the AUX port, the Bluetooth feature will be powered o.
Specifications
Support for multiple pairing: The SPK300K/W can connect up to 4 devices.
Bluetooth wireless connection: v3.0 + EDR: class II: typ. 8 M visible distance: max. 10M
Driver: 2x dia. 40mm
Frequency response:
Amplier Output: 2 z 2.2W (THD=10%, 1KHz@0dB) Max output: 2 z 2.7W (1KHz@0dB)
Signal to noise ratio: >60dB
Operation Voltage: Min 3V: Max 4.2VDC
Battery: Built in 3.7V 700mAh Li- Polymer rechargeable battery
Battery Charging voltage: typ. 5V: Max 5.5VDC (via USB port)
Battery Charging current= 500mA max.
Battery charging time = 2.5hrs.
Pairing the SPK300K/W to your Smartphone
When the SPK300K/W is opened the power is automatically turned on within 3 seconds, and its LED will indicate Blue on the front of the speaker. For rst time use, the blue LED will be ashing fast (8 times every second) to show it is ready to be paired. Browse your smartphone’s Bluetooth device list and select the one named “RISE” to conrm pairing with your smartphone. You will hear a beep tone on the speaker which will be sent from your phone. Then the speaker’s blue LED will ash steadily (1.5 times every second) showing that pairing is now complete.
Disconnecting the SPK300K/W | LED Status Indicator |
|
To disconnect the speaker from your smartphone, rst turn o the Bluetooth option on your phone. The speaker’s blue LED will ash slowly (1 time every second). Now press the speaker to close and shut it o. The next time you open the speaker it will automatically connect to your smartphone and the blue LED will light steady provided that you are within 5 meters.
Unpairing the Device to your Smartphone
If you would like to pair the SPK300K/W with another smartphone, switch o the Bluetooth function on your old smartphone rst. Then power on your new smartphone’s Bluetooth function and reopen the SPK300K/W to power the unit on. The blue LED should be steady, showing it is ready to be paired. Then repeat the steps in “Pairing the SPK300K/W to your smartphone.”
If the blue LED does not become steady, press and hold the play button(show symbol) until the speaker’s blue LED starts to ash fast again (8 times every second) then you can repeat the steps in “Pairing the SPK300K/W to your smartphone.”
When the SPK300K/W is connected to your smartphone and there is an incoming
call you have the option to answer the call and use the SPK300K/W as a speaker phone. Just press the play button (sy 
and speak towards the SPK300K/W. The built
in MIC will allow callers to hear you. If you would like to return the call back to your smartphone just press the play/hold button for 2 seconds and the call will switch
back to your smartphone. | AUX | MIC |
|
|
Playback time = ~ 5hrs (volume at 1/3 level)
Standby time: up to 20 hours
Current drain: (Power on, no input) 35mA
Dimensions: L75 x W75 x T81 mm
Weight: 295g
Limited 1 Year Warranty
Lenmar product is warranted to be free of defective parts and workmanship for stated period from the original date of purchase when sold through our website or our authorized retailers. Warranties are not transferable. The warranty excludes damage resulting from accident, misuse, modication, delay or loss of use, damage to equipment or by normal wear and tear.
ALL WARRANTY CLAIMS ARE PROCESSED ONLINE AT THE FOLLOWING LINK:
WWW.LENMAR.COM/WARRANTY
Warranty claims made after 60 days from the original date of purchase, will require a processing fee. Details will be included while completing the online warranty request. Payment can be made via credit card when completing the warranty form or a check can be included with the package when it is returned to Lenmar. Once the request is completed, you will be emailed with a conrmation WRA number and instructions on how to return the item for a warranty replacement.
Proposition 65 Notice (California)
The following statement is required in the state of California pursuant to the settlement of an action brought by the Mateel Environmental Justice Foundation against multiple electronics and appliance manufacturers
•WARNING: Handling the cord on this product will expose you to lead, a chemical known to the state of California to cause birth defects or other reproductive harm. Wash hands after handling.
For additional questions, comments, or to explore other Lenmar power solutions, visit our website at: www.lenmar.com or call 800.424.2703 from 9AM – 5PM PST.