REMOTE CONTROL
PREPARING THE REMOTE
CONTROL
Inserting the Batteries
1.First push to inside as the direction indicated by the arrow (See 1 )and then Remove the battery holder as the direction indicated by the arrow (See 2 ).
2.Replace the battery Set a new battery property with (+)side up as illustrated (See 3 ).
3.Insert the battery holder. Push in the holder to the original position(See 4 ).
USING THE REMOTE CONTROL
1.Face the remote control towards the player front face IR mark (remote control signal receiver).
2.Operation angle: About 
30 degree in each the direction of the front of the IR mark.