INSTALLATION
1.Install brackets and screws removed from your old radio (not provided with this unit).
2.Slide unit and frame into dash opening.
3.Trim ring has precutgrooves on the back of it. The size of the trim ring can be reduced (made smaller) for different types of installations. Hold the trim ring firmly in one hand, and using a pair of pliers, grasp the trim ring above the score line (groove) and bend gently back and forth a couple of times. Then the piece should break away.
4.Install dash panel.
5.Install faceplate by fitting left edge into position then pushing right edge closed.
2
3
4
1 | 5 |
6