Snapper IS2000Zc Mower Deck Preparation, Installation, Reinstall the Spindle Belt, Install Guard

Mower Deck Preparation

Reinstall the Spindle Belt

Refer to the belt removal instructions on Page 10, 11, & 12 and reverse the order for reinstalling the belt.

Install the Deck Guard

1.Install the new deck guard onto the mower deck and secure with the hardware previously removed (see Figure 24).

NOTE: The IS2000Z with 52” deck has a 2-piece deck guard. Install as shown in Figure 25.

NOTE: The IS4500Z Series has a 3-piece deck guard. Install as shown in Figure 26.

Figure 24. Install Guard

Installation

Figure 25. Install Guard - IS2000Z with 52” Deck

Figure 26. Install Guard - IS4500Z Series

16 www.ferrisindustries.com