Snapper IS1500Z, IS2000Zc manual Weight Mount Installation, Install Weight Carrier, Esgb

Install Weight Carrier

1.Remove the hairpin clip and clevis pin and remove the deck lift foot pedal. Lift the floor plate.

2.Install the weight carrier (E, Figure 46), mount plates (B & C) and fasten with the 3/8-16 x 3” bolts (A) and 3/8-16 nylon lock nuts (D). Tighten securely.

3.Install the counter weights (H) in the weight carrier and secure with the retaining pin (F) and hair pin clips (G).

4.Lower floor plate and reinstall deck lift foot pedal, clevis pin and hair pin clip.

Weight Mount Installation

(1000Z Series)

A
A
B
A
	C	A
		B
D
H
D	E
D		D
		F
	G

Figure 46. Install Weight Carrier

A.3/8-16 x 3” Bolts

B.Mount Plate

C.Mount Plate

D.3/8-16 Nylon Lock Nuts

E.Weight Carrier

F.Retaining Pin

G.Hairpin Clip

H.Weight

Installation

27

ESGB