Snapper IS2000Zc, IS1500Z manual Weight Mount Installation, IS4500Z Series, Install Weight Carrier

Installation

Weight Mount Installation

(IS4500Z Series)

Install Weight Carrier

1.Support the front of the frame in the center of the unit with a jackstand.

2.Remove the 1/2-13 x 5” bolts (B, Figure 53) and 1/2-13 nylon lock nuts (C) securing the front suspension arms to the frame.

3.Install the weight carrier (A) onto the front of the unit and secure with the 1/2-13 x 5” bolts and 1/2- 13 nylon lock nuts previously removed.

4.Install the counter weights (D) in the weight carrier and secure with the retaining pin (E) and hairpin clips (F).

A

C

B

E

F

D

Figure 53. Install Weight Carrier

A.Weight Carrier

B.1/2-13 x 5” Bolt

C.1/2-13 Nylon Lock Nut

D.Weight

E.Retaining Pin

F.Hairpin Clip

32 www.ferrisindustries.com