Snapper IS2000Zc, IS1500Z manual Weight Mount Installation, Install Weight Carrier

Installation

Weight Mount Installation

(IS500Z & IS1500Z Series)

Install Weight Carrier

1.Install the weight carrier (A, Figure 51) onto the front of the unit and secure with the 1/2-20 x 1- 1/4” bolts (B), 1/2” washers (C) and 1/2-20 nylon lock nuts (D).

NOTE: Use outer holes in the weight carrier for the

IS1500Z Series (shown) and the inner holes for the

IS4500Z Series.

2.Install the counter weights (E) in the weight carrier and secure with the retaining pin (F) and hairpin clips (G).

A

C

B

D

F

E

G

Figure 51. Install Weight Carrier

A.Weight Carrier

B.1/2-20 x 1-1/4” Bolt

C.1/2” SAE Washer

D.1/2-20 Nylon Lock Nut

E.Weight

F.Retaining Pin

G.Hairpin Clip

30 www.ferrisindustries.com