Snapper IS1500Z, IS2000Zc After Operation, Storing The Grass Catcher, Mowing Without The Blower

Models: IS1500Z IS2000Zc

1 44
Download 44 pages 58.2 Kb
Page 7
Image 7
AFTER OPERATION

AFTER OPERATION

Remove any debris from the the screen on the underside of the lid. Note: The lid screen can be partially removed for easier cleaning and should be cleaned regularly.

The blower housing and tube should be removed for cleaning.

Inspect the grass bags for wear or damage. Make sure that there is a snug fit between mower deck, blower housing, tubes, and grass catcher cover.

STORING THE GRASS CATCHER

Clean the grass catcher thoroughly using a mild detergent (other products may damage the tube). Remove any debris from the the screen on the underside of the lid. The screen can be partially removed for easier cleaning.

If paint has been scratched on metal parts, touch up with paint, or apply a thin film of oil to prevent corrosion.

Store in a dry area. Hang the catcher and catcher bags to dry thoroughly before storing for a long period

of time. Always store away from moisture.

MOWING WITHOUT THE BLOWER

For operation without the blower, the deflector must be properly installed in the down position.

To remove the blower, reverse the installation steps.

General Operating Instructions

Operation

5

GB

Page 7
Image 7
Snapper IS1500Z After Operation, Storing The Grass Catcher, Mowing Without The Blower, General Operating Instructions