Snapper IS2000Zc, IS1500Z manual Blower Installation

Blower Installation

3.Check the belt tension by measuring the distance from the center of the v-idler pulley (A, Figure 29) mounting bolt and the blower housing. This should measure between 3 - 3-3/8” (7,6 - 8,6 cm).

4.If measurement falls outside of this range, you must move the idler pulley (B) either forward or back to achieve the proper belt tension.

NOTE: If pulley position needs to be adjusted, make sure that it is reinstalled in the same row of holes as determined in the blower assembly (Step 13, page 11).

B 3" - 3-3/8"

(7,6 - 8,6 cm)

A

Figure 29. Check Belt Tension

A.V-Idler Pulley

B.Idler Pulley

Installation

5.Install the blower belt guard (A, Figure 30) and secure with the flange head bolts previously removed.

6.Install the deck guard top (B) and secure with the supplied knobs (C).

C B C

A

Figure 30. Install Guards

A.Blower Belt Guard

B.Deck Guard Top

C.Knob

18 www.ferrisindustries.com