Snapper IS2000Zc, IS1500Z manual Weight Mount Installation, IS1000Z Series, Install Weight Carriers

Installation

Weight Mount Installation

(IS1000Z Series)

Install Weight Carriers

1.Install the left-hand and right-hand weight carriers (E & H, Figure 47), bar clamps (F) and fasten with the 5/16-18 x 2-1/2” bolts (B) and 5/16-18 nylon lock nuts (G). Make sure carriers are tight against the outside of the suspension arm and do not interfere with the shock/spring assembly. Tighten securely.

2.Install the counter weights (A) in the weight carrier and secure with the clevis pins (D) and hair pin clips (C).

	B	A
D	C
		A
	H	B
		C
		D
	F	E
	G	F
		G

Figure 47. Install Weight Carriers

A.Weight

B.5/16-18 x 2-1/2 Bolt

C.Hairpin Clip

D.Clevis Pin

E.Weight Carrier-LH

F.Bar Clamp

G.5/16-18 Nylon Lock Nuts

H.Weight Carrier-RH

28 www.ferrisindustries.com