Install Collector Mount Plate
(1000Z & IS1000Z Series)
1.Remove the hardware securing the rear bumper screen (A, Figure 31) to the top and bottom bumpers (A, B). Save the 3/8” bolts and washers from the lower bumper.
2.Install the collector mount plate (A, Figure 32) on to the lower bumper and secure with the previously removed 3/8” bolts, 3/8” washers (B) and new
3.Install the
(C) through the top mount holes as shown in Figure 31. Install the support bar (D) and secure with the
Collector Installation
A | B |
C |
|
Figure 31. Remove Bumper Screen
A.Screen
B.Top Bumper
C.Lower Bumper
A | D |
| |
| E |
C | E |
| |
| B |
Figure 32. Install Collector Mount Plate
A.Mount Plate
B.3/8” Bolts & Washers (previously removed)
C.
D.Support Bar
E.
Installation
19
GB