Installation
Collector Installation
Install Hose
1.Lower the mower deck to the lowest cutting position.
2.See Figure 45. Install the hose (A) onto the blower and secure with the removable clamp (with knob) (B). At least two bands must cover the outlet of the blower (C).
3.Cut the hose to fit properly between the blower and collector as shown in Figure 45. At least two bands must cover the inlet of the collector (D). Secure with the stationary clamp (E).
A |
E |
D |
A |
A |
B |
C |
Figure 45. Install Hose
A.Hose
B.Removable Clamp (with knob)
C.Blower Outlet
D.Collector Inlet
E.Stationary Clamp
26 | www.ferrisindustries.com |
