Antec P180B Fan user manual To install the spoiler, Lower Chamber Tricool Fan

These two fans are mounted so that the air is blowing out of the case. The top fan comes with a spoiler to mount on the top of the case.

To install the spoiler:

1.With the spoiler open end facing the rear of the case, carefully align the tabs of the spoiler with the notches on the case.

2.Insert the tabs into the notches and slide the spoiler towards the front of the case until it clicks into position

Specifications:
Size:		120 x 120 x 25.4 mm
Rated Voltage:		DC 12V
Operating Voltage:		10.2V ~ 13.8V
Speed	Input	Air Flow	Static	Acoustical	Input
	Current		Pressure	Noise	Power
High	0.24A	2.24 m³ / min	2.54 mm-H2O	30 dBA	2.9 W
2000 RPM	(Max.)	(79 CFM)	(0.10 inch-H2O)
Medium	0.2A	1.59 m³ / min	1.53 mm-H2O	28 dBA	2.4 W
1600 RPM		(56 CFM)	(0.06 inch-H2O)
Low	0.13A	1.1 m³ / min	0.92 mm-H2O	25 dBA	1.6 W
1200 RPM		(39 CFM)	(0.04 inch-H2O)

The Lower Chamber Tricool™ Fan

This is a special high throughput 120mm fan. Because of its design this fan can move more air than standard 120mm fans at the same speed (RPM). This fan is placed in the middle of the lower chamber, which act likes a wind tunnel when the side panels are closed. Note: we recommend setting the speed to Medium or Low. The default fan setting is “Medium”.

Specifications:
Size:		120 x 120 x 25.0 mm
Rated Voltage:		DC 12V
Operating Voltage:		10.2V ~ 13.8V
Speed	Input	Air Flow	Static	Acoustical	Input
	Current		Pressure	Noise	Power
High	0.2A	1.70 m³ / min	2.22 mm-H2O	28 dBA	2.4 W
1500 RPM	(Max.)	(60 CFM)	(0.08 inch-H2O)
Medium	0.15A	1.36 m³ / min	1.42 mm-H2O	23 dBA	1.8 W
1200 RPM		(48 CFM)	(0.05 inch-H2O)
Low	0.1A	1.02 m³ / min	0.80 mm-H2O	17 dBA	1.2 W
900 RPM		(36 CFM)	(0.03 inch-H2O)

6