1.Install the blower onto the mower deck. Refer to Figure 27 for the position of the quick pins in relationship to the chute mount bracket on the mower deck. The quick pins fit into the same holes that the chute mount rod was installed.
Blower Installation
44” & 48” Decks
52” & 61” Decks
Figure 27. Install Blower On Deck (Notice Pin Orientation)
Installation
2.Install the blower drive belt. Refer to Figure 28 for the proper belt routing. It may be required to loosen the idler pulley mounting hardware to get the belt past the belt keeps.
IMPORTANT NOTE: The gray area denotes the flat side of the belt.
Figure 28. Install Belt
17
GB