
3.1.1 Removing the Protection Tape and Mat from the Engine | ||
3.1.2 Set the PSAir Filter for the Engine Rear Cover | ||
3.1.3 Removing the Protection Tape from 2000 Sheet Hopper | ||
3.1.4 Removing the Protection Tape from 500 Sheet Hopper ; 2 portion | ||
3.2 | PREPARATION FOR INSTALLATION OF THE FINISHER | |
3.3 | PREPARATION FOR INSTALLATION OF THE HIGH CAPACITY HOPPER | |
3.4 | PREPARATION FOR INSTALLATION OF THE CONTAINER STACKER 1 OR 2 | |
3.5 | PREPARATION FOR INSTALLATION OF THE TRANSIT PASS UNIT TYPE DDP |
CHAPTER 4. INSTALLATION | ||
4.1 | INSTALLATION IN THE COMPOSITION OF THE PRINTERAND FINISHER / FINISHER SR5000 ... | |
4.2 | INSTALLATION IN THE COMPOSITION WITH THE HIGH CAPACITY HOPPER | |
4.3 | INSTALLATION IN THE COMPOSITION WITH THE CONTAINER STACKER 1 OR 2 | |
4.3.1 Connection of the Engine and Container Stacker 1 or 2 | ||
4.3.2 Connection of the Container Stacker 1 and Container Stacker 2 | ||
4.3.3 Connection of the Container Stacker 2 and Finisher / Finisher SR5000 |
CHAPTER 5. CHECKS | ||
5.1 | CONFIRMATION OF THE PAPER SIZE INDICATION | |
5.2 | PRINTING OF THE STATUS REPORTS | |
5.3 | CHECK THE PRINT CONTAMINATION | |
5.4 | CONFIRMATION OF THE STAPLING | |
5.5 | ADJUSTMENT OF PAPER FEEDING POSITION OF TRAY 1 | |
APPENDIX 1. INSTALLATION AREA INFORMATION | 1 | |
APPENDIX 2. LOCATIONS OF THE LEVELING BOLT AND CASTER | 10 |
II
L
02
Table of Contents ii