1.4 Tools Required |
| ||
| Table 1.2 Tools Required |
| |
| Item | Name | Usage |
| 1 | Cutter | Unpacking |
| 2 | Phillips Screw Driver NO.2 shaft | Removing and installing the screw for covers |
|
| length; approx. 40 and 100mm |
|
| 3 | Adjustable Open End Wrench | Leveling the bolt |
|
|
| Fixing the leveling the bolts |
| 4 | Level Meter | Installation the Container Stacker |
1.5 Environmental Conditions | |||
| Table 1.3 Environmental Conditions | ||
| Items |
| Value |
| Temperature | 10 | ~32 °C (50 ~ 89.6°F) |
| Humidity | 20 | ~80 %RH |
|
| (Wet Bulb 26 °C (78.8 °F ) max.) | |
| Altitude | 0 to 2,100 m (0 to 7,000 feet) max. | |
1.6 Input Line Voltage
Table 1.4 Print Engine Input Line Voltage
Input Line Voltage | AC 200V ~ AC 240V |
Phase | Single Phase, two wires and grounding wire |
Frequency | 50/60 Hz ±1Hz |
Transient (Static) | ±10% |
Transient (Dynamic) | |
Drop out |
II
L
010
Installation Requirements
