8)Connecting the Power Supply Cable
Please connect the cable according to this procedure when you use cables other than the cable appended to the machine.
(1)Put the Power Supply Cable and put it through the Cord Lock and pull it out of the Terminal Block.
(2)Connect the Power Supply Cable to the Terminal Block and chassis.
(3)Fasten the Power Supply Cable by the Cord Lock.
WARNING
1)The voltage is constantly in unless the machine is unplugged or Breaker Switch is turned off.
2)Unplug the Power Supply Cable prior to connecting the power supply source.
M4
|
| Power Supply Cable | Cord Lock | |||
Cord Lock |
| Power Supply Cable | ||||
|
|
| ||||
|
|
|
| Star Washer | ||
|
|
| Protective Erathing Symbol | |||
| Rear internal view of Printer |
|
| View of Power Supply | ||
|
|
|
|
|
|
|
II
L
