4.3 Installation in the composition with the Container Stacker 1 or 2
4.3.1Connection of the Engine and Container Stacker 1 or 2
1)Drawer the 2000 Sheets Hopper and set the paper guide at the position of 8.5” paper size.
2)Remove the M4 Screw and the 2000 Sheets Hopper.
Paper guide
Lever
M4 Screw
2000 Sheets Hopper
3)Turn the four leveling bolts until casters are floated.
4)Adjust the horizontal level of the printer with the Level Meter putting on the frame.
Caster
Floor
Gap (Max 1mm)
Level Meter | Leveling Bolt |
II | L | 00 |
|
