2.3 Unpacking of the High Capacity Hopper

WARNING

1)Perform unpacking where there is no dust or water leaking.

2)Do not place heavy objects which weight 5 kg or more on device.

3)Observe the speed limit of 300 mm/sec. (1.08 km/hr) when moving device. Do not move device on unleveled floor. Do not tilt device 15 ° or more.

4)Choose the location to place device where the slope is less than 15 °. (Only left and right direction from view of operator’s side.)

5)Choose the location to place device where there is no condensation.

2.3.1Confirmation of Parts Quantities

Table 2.6 Components in the package

Unit of Packing

Quantity

High Capacity Hopper

1

2.3.2Unpacking Procedures

1)Cut the V Bands and remove the Cap.

Cap

II

L00

Unpacking 2-11

Page 24
Image 24
Ricoh 70E installation manual Unpacking of the High Capacity Hopper, Confirmation of Parts Quantities