4.3.3Connection of the Container Stacker 2 and Finisher / Finisher SR5000
1)Remove the two M3 screws and the discharging brush from the Container Stacker 2.
2)Install the Guide plate (G) with the Static electricity eliminator (“FRONT” letter is surface.) by using the two M3 Screws. (Be careful that the hair of the Static electricity eliminator does not fall.)
3)Install the guide plate (H), connecting stay and main MT plate.
Container stacker 2
Connecting stay |
|
|
| Guide plate (G) | |
|
|
|
|
|
|
M4 screws
M3 screws
M3 screws with washer
Static electricity eliminator
M4 screws
Guide plate (H)
Main MT plate
4) Remove the rear covers from the Engine, Container Stacker 2 and Finisher.
II
L
002
