8)Connect the FNS IF cable (4 pin white connector) coming from the Container Stacker 2 to the J680 on the ST09X P/K of the Container Stacker 1. (Connection 1 on the below figure)
9)Take out the CSTAC cable (2 pin white connector) from the Container Stacker 1 and connect it to the CSTAC cable (2 pin white connector) of the Container Stacker 2. (Connection 2 on the below figure)
10)Take out the RB cable (4 pin white connector) from the Container Stacker 1 and connect it to the RB cable (4 pin white translucence) of the Container Stacker 2. (Connection 3 on the below figure)
11)Mount the CST FG cable coming from the Container Stacker 1 on the frame of the Container Stacker 2 by using M4 screw (Connection 4 on the below figure).
12)Turn on the No. 4 and 5 and turn off the No. 2 and 8 of the SW1 mounted on the CPXXX P/K of the Engine. (No RoHS Compliance Unit)
13)Turn on the No.4 and 5 and turn off the No.2 and 8 of the SW1 mounted on the CPXXX P/K of the Engine. Turn off the No.7 and 8 of the SW2 mounted on the CPXXX P/K of the Engine.
(RoHS Compliance Unit)
[Note] Put the cable through the opening “A” of the Engine for connection.
RB cable
(For Container Stacker 2)
Engine
14)
Connection 3 | RB cable | |||||
(For Container Stacker 1) | ||||||
|
| |||||
(4 pin white) |
|
| AF cable | |||
|
|
|
| |||
|
|
|
|
|
| |
Container Stacker 2 |
|
|
|
| Container Stacker 1 | |
(W/ Through path) |
|
|
| (W/ Sample tray) | ||
|
|
|
|
| ||
|
|
|
|
|
| |
|
|
|
|
|
| |
| Connection 2 | Opening “A” | Connection 1 | |
M4 screw | (2 pin white) |
|
| (20 pin black) |
Connection 4 | CST FG cable | CST AC cable | Disconnection 2 | |
| ||||
(2 pin white)
Disconnection 1(4 pin white)
No RoHS Compliance
Unit
OFF |
| ON |
| ||
|
|
|
OFF | 1 2 3 | |
MKK | 4 5 6 7 8 | |
SW2
OFF |
| ON |
| ||
|
|
|
OFF | 1 2 3 | |
MKK | 4 5 6 7 8 | |
SW1
RoHS Compliance Unit
| II | L | 001 |
|
|
