Samsung DW80H9930US user manual troubleshooting, English, Problem, Possible Cause, Solution

troubleshooting

PROBLEM	POSSIBLE CAUSE	SOLUTION
	The water supplied is soft and too	Underload the dishwasher and use a rinse
Leaves glasses with	much detergent was used.	aid to minimize this.
a light film.	Aluminum dishes were included in	Remove the marks on the dishes using a
	the wash load.	low sensitivity cleaner.
Leaves a yellow	This is caused by coffee and tea	Remove the soils using a spot cleaner.
or brown film on	soils.
the inside of the
dishwasher.
	There is no rinse aid in the	Check the dispenser and add rinse aid.
	dispenser.	Use a liquid type rinse aid.
	The temperature of the water	Connect the water supply line to a hot
	is low when the dishwasher is	water supply.
	running.	Use rinse aid with the Sanitize option.
Does not dry dishes
	Too many dishes have been	Proper loading of items can affect drying.
well.	loaded.	Load your dishes as recommended.
		(See page 16.)
	Glasses and cups with concave	After fi nishing the cycle, empty the lower
	bottoms hold water. This water	rack fi rst and then the upper rack. This will
	may spill onto other items when	prevent water dripping from the upper rack
	unloading.	onto the dishes in the lower rack.
	Water was left over from an	Insert detergent without loading dishes,
	incomplete cycle.	and run the Normal cycle to clean the
		dishwasher.
	The Drain Hose is obstructed.	Contact a qualifi ed service technician to
Has a bad odor.		remove any obstruction from the drain
		hose.
	The dishwasher is not used daily	With the dishwasher empty and no
	or soiled dishes are left in unit too	detergent, place a glass with 8 ounces of
	long.	vinegar upright into the lower rack, and
		then run a Normal cycle.
	Sound is generated when the	This is normal operation.
	dispenser cover is open and the
	drain pump is operating in an early
	stage.
	The dishwasher is not level.	Ensure the dishwasher is level.
Is too noisy.
	Foreign material (a screw, a plastic	Contact a qualifi ed service technician to
	piece) is in the pump chamber.	remove foreign material from the pump
		chamber.
	There is a ‘chopping’ sound	Rearrange the dishes.
	because a nozzle is bumping
	against the dishes.
	The nozzle hole is clogged with	Clean the nozzle hole.
Does not have a	food particles.	See pages 22 and 23.
	The nozzle is blocked by a dish or	After placing the dishes into the racks,
smoothly rotating
	pot and cannot rotate.	rotate the nozzles by hand to check
nozzle.
		whether any of the dishes interfere with
		them.

English - 26

DW80H9950-00149A_EN_140227.indd Sec7:26 2014-02-27 ￿￿ 4:15:37