12)Install the Finisher to the Container Stacker
(1)Fit the hooks on the Container Stacker installation plates (upper and lower) into the upper and lower holes on the Finisher as illustrated below, then lock them by pushing the Finisher to the back.
CAUTION
When installing the Finisher, don’t hit following “A” part to the Printer.
Confirm the SB cover opens and shuts smoothly after attaching.
Holes
M4x6 screws
3 Places
Upper view
Finisher
Container Stacker 2
Hooks
Lower view
Finisher |
| Container Stacker 2 |
|
|
|
II
L
01
