Ricoh 70E installation manual Offmkk SW1, 6 7

13)Connect the FNS IF cable (4 pin white connector) coming from the Container Stacker 2 to the 4 pin white connector in the Finisher (Connection 1 on the below figure).

14)Connect the FNS IF cable (20 pin black connector) coming from the Container Stacker 2 to the CN7 connector on the Finisher main P/K (Connection 2 on the below figure).

15)Turn on the No. 5 and 8 and turn off the No. 2 of the SW1 mounted on the CPXXX P/K of the Engine.

Turn on the No.8 and Turn off the No.7 of the SW2 mounted on the CPXXX P/K of the Engine.

Turn on the No.2 and 4 of the SW1 mounted on the ST09X P/K of the Container Stacker 2. Turn on the “L” of the SW1 mounted on the P/K of the Standard Finisher(FS-108R).

[Note] Put the cable through the opening “A” of the Container Stacker 2 for connection.

Opening “A”	AF cable	Connection 2
		(20 pin black)

Printer

Container Stacker 2	Standard Finisher
(W/ Through path)

OFF		ON
OFF	1 2 3
MKK	4 5 6 7 8

SW2

OFF		ON
OFF	1 2 3
MKK	4 5 6 7 8

SW1

	Disconnection 1			Disconnection 2		Connection 1
	(4 pin white)			(2 pin white)		(4 pin white)
ON		OFF
					H			L
							SW1
1 2 3 4		OFFMKK	SW1

16) Install the Rear Covers of the Printer, Container Stacker 2 and Finisher.

II

L

001

Preparation for Installation 4-43